Not compatible with the regular AJAX Hub

Compatibility

Hubs
Hub Plus
Hub 2 (2G)
Hub 2 (4G)
Hub 2 Plus
Hub Hybrid (2G)
Hub Hybrid (4G)

Radio signal range extenders

ReX
ReX 2

Against invisible threats
FireProtect 2 is a next-gen detector designed for residential fire safety. The carbon monoxide sensor alarms before the concentration level become threatening and notify about danger with a built-in powerful siren and critical alerts from Ajax apps. Thought-out design, mounting, and in-app settings make installation straightforward and quick. Everything meets the most modern fire safety standards.

Specifications of AJAX FireProtect 2

Carbon monoxide (CO) detection

Sensitive elements

• 
  

  chemical CO sensor

  
  

Alarm if accumulated dose of CO is exceeded

• more than 50 ppm (0.005%) — no more than in 90 minutes


• more than 100 ppm (0.01%) — no more than in 40 minutes


• more than 300 ppm (0.03%) — no more than in 3 minutes

CO concentration of 400 ppm (0.04%) within 3 hours can be life-threatening.
The detector stops notifying about the dangerous level of carbon monoxide when the concentration drops to 50 ppm (0.005%) within one minute.

Sensor life

• 10 years

After 10 years of operation, the detector must be replaced with a new one.

Additional features

• In-built siren - volume 85 dB at a distance of 3 meters

Sound notification of alarms. Active until the reason for triggering is eliminated or until the user disables notification.

Interconnected Fire Detectors Alarms

All fire detectors in the system turn on built-in sirens if at least one of the detectors registers an alarm.
An interconnected fire alarm is activated during one “hub — detector” polling interval but no more than 20 seconds later.

• LED indication - green is a power indication

A LED indicator on the device enclosure lights up once every 56 seconds. The indication meets the requirements of EN 50291.

• yellow is an indication of malfunctions

A LED indicator on the device enclosure lights up when malfunctions are detected. For example, if the battery is low.

• red is an indication of fire alarms

A LED indicator on the device enclosure lights up when the detector registers a fire alarm.

Button on the front panel of the detector
In normal mode, runs the detector test when pressed. In the event of an alarm or malfunction, the pressing turns off the detector sound notification.
 
Download the product information

ManualYou may also be interested inAJAX Hub Plus White - Wireless Intelligent Control Panel. Ethernet, Wi-Fi, 3G, 2хSIM-card11795- 10%346.50 € 385412.34 € inc. vatAvailability: in Stock Add to CartAJAX Hub 2 4G White - Security system control panel with support for photo verification33152- 10%347.40 € 386413.41 € inc. vatAvailability: in Stock Add to CartAJAX Hub 2 Plus White - Wireless Intelligent Security System Control Panel20279- 10%368.10 € 409438.04 € inc. vatAvailability: in Stock Add to CartAJAX StarterKit Plus White - Wireless Security System20290- 10%478.80 € 532569.77 € inc. vatAvailability: in Stock Add to CartAJAX StarterKit Cam Plus White - Wireless Security System with Visual Alarm Verifications20294- 10%582.30 € 647692.94 € inc. vatAvailability: in Stock Add to Cart

---

---

br>
AJAX FireProtect 2 Wireless Fire Detector with Heat and CO Sensor, Replaceable Battery, White