Stiebel Eltron closed WW- Wandspeicher SH 80 S, 80 l, 1-6 kW, white Technical description: Hot water Wandspeicher for any desired hot water supply. > Closed (flameproof) to supply several outlets. Plumbing also in connection with plastic pipe systems (observe manufacturer's Plumbing and limits of use). > Open (pressureless) to supply a sampling point. Electronic heat content indication with LED display in the control panel. Steel inner container with special direct anticor iron and standard equipment with signal anode (anti-corrosion rod) and indicator light in the control panel Thermal insulation with minimal heat loss Universal flange Single-circuit operation The water content is controlled at the set temperature up to 82 degrees C, or a temperature limiter on the selector knob at 45, 55 and 65 degrees C. Automatic frost protection, signal lamp for heating, exchangeable copper heating flange, radiator connections through complete flange plug, power versions possible Prefabricated suspension bar also allows mounting in the corner Plumbing with: Sicherheitsgruppe KV 30 or KV 40 with pressure-resistant connection or fitting for open units with pressure-free connection Quality and safety mark VDE / GS mark, radio protection IP 25 D (jet w protects) Technical data: Connected load 1 to 6 kW Connection 1 / N / PE 230 V Connection 2 / N / PE 400 V Connection 3 / N / PE 400 V Nominal capacity 80 l Water connection G 1/2 Mixed water quantity 40 ° C 159 l Standby power consumption included 65 degrees C / 24h 1930 , 66 kWh flow rate max. 18 l / min nominal pressure 1930 , 6 MPa inner container (material) steel, email. Type Closed Outer jacket (material) Steel sheet Color White Upper cap (material) Plastic Dimensions and weight: H / W / D in mm 1050/510/510 Weight 38, 1930 kg

Attention: Power connection (3 ~ / 400V) required. The approval of the local network operator may be required. Installation only by qualified personnel.