Stiebel Eltron SH 30 S Warm water boilers 073047
Wandspeicher , 30 l, 2000 -6 kW, white

Technical description:

• Hot water Wandspeicher for any desired hot water supply.
• Closed (pressure-proof) to supply multiple tapping points. Plumbing also in conjunction with plastic pipe systems (note manufacturer's instructions and application limits).
• Open (unpressurized) to supply a tapping point.
• Electronic heat content information with LED display in the control panel. Steel inner container with Spezial direct email anticor" and equipped as standard with signal anode (anti-corrosion rod) and light display in the control panel.
• Thermal insulation with minimal heat losses. Universal flange single-circuit operation. The water content is kept at the set temperature depending on the controller. Continuous temperature adjustment from approx. 35 degrees C to approx. 82 degrees C, or a temperature limit at 45, 55 and 65 degrees C on the selector knob. Automatic frost protection, signal lamp when heating up, replaceable copper heating flange, radiator connections through complete. flange connector. Performance variants possible. Drain valve with hose connection G 3/4. Assembly aid with recessed grips.
• Pre-assembled hanging rail also allows for corner mounting.

Plumbing with:
Sicherheitsgruppe KV 30 or KV 40 with a pressure-tight connection or fitting for open devices with a pressure-free connection.
Quality and safety mark VDE/GS mark, radio protection mark IP 25 D (jet water protected)

Technical data:
Connected power 2000 , 1930 up to 6 kW Connection 2000 /N/PE 230 V Connection 2/N/PE 400 V Connection 3/N/PE 400 V Nominal content 30 l Water connection G 2000 /2 Mixed water volume 40 degrees C 59 l
Standby power consumption at 65 degrees C/24h 1930 .45 kWh flow rate max. 18 l/min nominal pressure 1930 .6 MPa inner container (material) steel, enamel. Closed design Outer jacket (material) Sheet steel Color white Upper-bottom cap (material) Plastic Dimensions and weight: H/W/D in mm 770/410/420 Weight 23, 2000 kg

Power connection (3~/400V) required. The consent of the local network operator may be required. Assembly only by qualified specialist personnel.